How To Move Physical Camera In 3ds Max

Sets the photographic camera's main concrete attributes

Picture show / Sensor group

Preset

Chooses the model of moving-picture show or charge-coupled sensor. The choices are 35mm (Full Frame) film (the default), and a diverseness of industry-standard sensor settings. Each setting has its default Width value. The Custom choice is for choosing an arbitrary Width.

Movie/Sensor settings

Left to correct: 35mm, APS-C (Canon), APS-C (Nikon, Sony, etc.)

Film/Sensor settings

Left to correct: APS-H (Catechism), Iv Thirds

Note: Y'all can add together new custom presets (we don't recommend that y'all remove the original ones) by editing PhysicalCameraFilmPresets.ini. This file is in the root 3ds Max installation binder, under the folder for your local language (for instance, \en-US).

Width

Lets you manually adapt the width of the frame.

Lens group

Focal Length

Sets the focal length of the lens. Default=twoscore.0mm.

Specify FOV

When on, lets you prepare a new Field-of-View (FOV) value, in degrees. The default FOV value depends on the Film/Sensor Preset you lot have chosen. Default=off.

Changing the FOV too drastically tin can cause perspective distortion.

Note: While Specify FOV is on, the Focal Length control is disabled. However, changing the value of one of these controls as well changes the value of the other.

Zoom

Zooms the lens in or out without changing the camera position.

Zoom provides a way to crop the rendered image without altering whatever other camera effects. For case, changing the Focal Length changes the bokeh touch (considering it changes the aperture size), while changing the Zoom value does not.

Aperture

Sets the aperture every bit an f-number, or "f-stop." This value affects both exposure and depth-of-field. The lower the f-number, the wider the aperture and the narrower the depth of field.

Focus

Use Target Distance (The default.) Uses the Target Altitude as the focus distance.
Custom Uses a focus distance other than the Target Distance.

The focus plane appears in viewports every bit a transparent rectangle, divisional by the dimensions of the camera's view.

Focus Distance When Custom is chosen, lets you lot fix the focus distance.

Lens Breathing Adjusts the field of view by moving the lens toward or away from the focus distance. A Lens Breathing value of 0.0 disables this result. Default=1.0.

Enable Depth of Field When on, the photographic camera generates blurring at distances not equal to the focus distance. The force of the depth-of-field effect is based on the Aperture setting. Default=off.

Left: No depth of field

Right: Shallow depth of field (Aperture = f/1.4)

Shutter group

Type

Chooses which units to use in measuring shutter speed: frames (the default), which are typically used in computer graphics; seconds or fractional seconds, which are typically used in notwithstanding photography; or degrees, which are typically used in motion-picture photography.

Duration

Sets the shutter speed, based on the the Type of units you choose. This value tin affect exposure, depth of field, and motility blur.

Offset

When on, specifies when the shutter opens, relative to the start of each frame. Irresolute this value can affect move mistiness. The default Offset value is 0.0. Default=off.

Enable Motion Blur

When on, the camera generates move blur. Default=off.

Left: No motion mistiness

Correct: Default motion blur (Duration = 0.5 frame)

Source: https://knowledge.autodesk.com/support/3ds-max/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/3DSMax-Rendering/files/GUID-9D9C67A8-CCC1-4193-91AD-6D119A6439F7-htm.html

Posted by: herreratarin1976.blogspot.com